Rose electronics Xtensys Bedienerhandbuch PDF herunterladen (Seite 21)

XTENSYS INSTALLATION AND OPERATIONS MANUAL

Configure KVM

Figure 7. Configure KVM menu

The “Configure KVM” menu allows you to change each selected KVMs name, resolution, start, and user parameters.

KVM name (Default: KVM Station x)

To change the KVM name, select it from the menu and press [Enter]. An input box will display to enter a new KVM

name. Type in a new name and press [Enter]. KVM names can be 16 characters in length, case sensitive.

Resolution (Default: 640x480@60Hz)

Selects the resolution and refresh rate of the on-screen display when no attached computer video is present. If a

computer video is shown, the detected video resolution from the connected computer is used.

To change the resolution for a selected KVM station, select the KVM station to change the resolution and using the

left arrow key, select the resolution field and press [Enter]. A list of supported resolutions will display. Select the new

resolution from the list and press [Enter]. The supported resolutions are:

 640x480@60Hz

 640x480@72Hz

 640x480@75Hz

 640x480@67Hz

 832x624@75Hz

 1152x900@66Hz

 1152x900@76Hz

Start (Default: 0)

Assigns the CPU port number the KVM station will connect to on start up and login. 0 = no connection. To change

the value, select it from the menu and press [Enter]. Type in the CPU port number the selected KVM station will

connect to upon start up or login and press [Enter].

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Keine Kommentare

Rose electronics Xtensys Bedienerhandbuch Seite 21